Metal Roof Cost Calculator
Metal roofing costs more than shingles up front but can last 40 to 70 years. Choose the panel type and roof size to estimate an installed price.
Most homeowners pay $20,500 to $33,500 for 2,000 sq ft, standing seam steel.
Your estimate
- Materials and labor
- Add-ons
- Permit, trim and disposal
National installed prices, materials and labor included. Your local quotes may differ.
Metal roof cost by option
Installed totals (based on 2,000 sq ft), with standard conditions and permit, trim and disposal included.
| Option | Typical total |
|---|---|
| Exposed-fastener steel panels | $12,500 to $21,500 |
| Stone-coated steel | $18,500 to $27,500 |
| Standing seam steel | $20,500 to $33,500 |
| Standing seam aluminum | $24,500 to $41,500 |
| Copper or zinc | $50,500 to $91,500 |
Installed price per unit
| Option | Installed price |
|---|---|
| Exposed-fastener steel panels | $6.00 to $10.00 per sq ft |
| Stone-coated steel | $9.00 to $13.00 per sq ft |
| Standing seam steel | $10.00 to $16.00 per sq ft |
| Standing seam aluminum | $12.00 to $20.00 per sq ft |
| Copper or zinc | $25.00 to $45.00 per sq ft |
What drives the price
- Panel systemExposed-fastener panels are the budget option. Standing seam hides the fasteners, handles expansion better and costs more to install.
- Metal typeSteel is the most common. Aluminum resists salt air near the coast. Copper and zinc are premium, architectural choices.
- Roof complexityValleys, dormers and skylights need custom-bent trim, which adds labor on metal more than on shingles.
- Installer experienceMetal is a specialty. Fewer crews install it well, and that scarcity shows up in the price.
How this estimate works
The calculator multiplies your roof area by the installed price range for the option you pick, adjusts it for the conditions you set, then adds any extras you tick and typical permit, trim and disposal. The headline number is the midpoint of your range. Low-end prices fit simple jobs in lower-cost areas. High-end prices fit complex jobs, premium brands and high-cost metros.
Get at least three written quotes before you hire. Ask each contractor to list materials, labor, permits and disposal separately so you can compare them line by line. Read how we build our ranges.
Common questions
Is a metal roof louder in the rain?
Over solid decking and underlayment, most homeowners notice little difference from shingles. Noise is mainly an issue on open-frame buildings.
Can metal go over existing shingles?
Some systems allow it where code permits, which saves tear-off cost. It depends on the panel type and the condition of the roof below.
Does a metal roof lower energy bills?
Reflective coatings can reduce cooling load in hot climates. The size of the saving depends on your insulation and climate.
Sources and method
Price ranges are national installed estimates maintained by the HouseMath editorial team and last reviewed September 2026. For the labor side of the job, see the U.S. Bureau of Labor Statistics Occupational Employment and Wage Statistics data for roofers (SOC 47-2181), which shows how trade wages differ by state.